Archive for the ‘AVM’ Category

Opensuse 12.1 Fritz!box 7390 and VPN – did it

April 8, 2012 Leave a comment

So the idea was to be able to access my Fritz!box 7390 router from the outside via VPN and to be able to do this on my Samsung NC10 which now runs solely on OpenSUSE 12.1. The Fritz!box comes with an IPSEC installed and AVM provide a bespoke VPN client (in german) for Windows7 to work with it. It isn’t that stable and it is limiting in what you can do with it. When it comes to OpenSUSE they provide nothing and you are on your own. Suggestions in comments indicated the Shrew VPN client would be the way to go. As a straight replacement on Win7 it works fine. You have to manually edit the configuration file. It is pretty simple job to cut and paste the relevent details from the Fritz!box configuration file to the Shrew file. This option only allows you to route to your home network only. Getting it to route through the Fritz!box out to the internet (which I wanted to do) is a bit more problematic. You will need to edit the Fritz!box config file and the and the Shrew file directly to alow this to happen. Anyway, after some experimentation it works.

So on to OpenSUSE 12.1. The theory says you just copy the shrew config file over and just use it in the linux client. Before that there are a couple of things you need to do. Obviously you need to install Shrew from the repository. This should bring in the IPSEC packages too. Before you even start Shrew you need to run IKE. If you want to run it automatically you will need write a script. I couldn’t be bothered so I run it from a terminal. From that point on Shrew behaves like the Windows version….. except that it didn’t. For some reason I couldn’t fathom domain numbers were not resolving to IP numbers. Shrew has the option to automatically find a DNS server and secting that did the trick. So I can now VPN through the Fritz!box to the internet using OpenSUSE. It should have been easier though. Next job might well be to get my Xiaomi MIONE phone to VPN through it.

Categories: AVM, Fritz!box, Linux, OpenSUSE 12.1, VPN

Opensuse 12.1 Fritz!box 7390 and VPN. How do you do it?

January 10, 2012 8 comments

OK here is a challenge for some of you. This is an area (one of many) where I know nothing so bear with me. When running Windows on my laptop I can VPN into my Fritz!box 7390. A Friz!Box Windows app generates a configuration files that you load into the router through the in web interface and into the Fritz!Box VPN client. It sounds a little complicated but the configuration only has to be done once. From then on you just fire up the client when you are in a remote location and it connects. Simples.
So now to my question. How do I do this in OpenSUSE 12.1? I tell you what I have tried so far. I have installed KVPN – the KDE VPN client. This allows you to instal the file – which I have to generate under windows (is there a Opensuse 12.1 equivilent process for this too?). There is even a special profile just for Fritzboxes that allows KVPN to import the file. At this point I demonstrate my ignorance (again). KVPN wont work with just the Fritz!box file. It uses IPSEC (I think) so I have downloaded IPSEC files and the IPSEC tools file. This fixes some “racoon” of the errors but I still get a “bind” error. Since both the Fritz!box and OpenSUSE have strong German influences there is a lot of support in the German forums. But my German is weak and Google Translate has not been a friend to me in this matter. So if there are any kind souls out there who know what I need to be doing then please tell me what I need to do. Answers in German are fine. There is one condition however. If the solution involves excesive command line activity, file editing or log dumping then I probably won’t do it as it would defeat the point I was trying to prove in my earlier post. Point and click solutions will certainly given a try. Failing that I might explore the OpenVPN route so any neat solutions here are also welcome.

So while I wait, the HD2 still wants to play

December 21, 2011 Leave a comment

Yes, so while I wait for my new phone, I haven’t forgotten the HD2. There is life in the old girl yet. As you might know from my earlier posts I use an AVM Fritz!Box Fon WLAN 7390 (yes it is a bit of a mouthful) router. Like all routers it just sits there and does its job. Thing is it does a lot of jobs. It is also a DECT phone base-station and seamlessly integrates land-line and VOIP. There is also an Android app called FRITZ!App Fon. What this does is make your Android phone become a DECT handset allowing you to make or pick up landline or VOIP calls via WIFI. The problem was the app wouldn’t work with y HD2 which was disappointing. The phone would pick up or connect a call but you could hear anything. Not any more! I am not sure if it is because the app is updated or the MIUI ROM is doing something. But whatever its is, it now works perfectly.

The router also acts as a Media Server and there is an app for that as there is for the router’s call register.

AVM Fritz!box 7390 & IPv6

August 31, 2011 Leave a comment

Just a quick update. AVM have released a firmware update for the 7390. I tried it last night.  There are even more features available now and some important fixes. Most notably, they have improved IPv6 implementation. It now seems to be working to the extent that I could test it.

Updating the Fritz!box is a very simple process and no settings were lost. Excellent.

Categories: AAISP, AVM, Fritz!box, IPv6, Modem, Router, VOIP, WIFI

AVM Fritz!box Fon

August 30, 2011 Leave a comment

Now I have got an internet connection (and it is still working) that next stage was to take another look at the home network. The first thing to consider was the Modem/WiFi Router. For most people, these are pretty mundane gadgets that are either on or off. Certainly this  was the case for me and I had always used the one supplied by BT. I would have used the one supplied by BE too  – at least to start with. But AAISP assume you will want to use your own. You can order one from them but you probably find a better deal elsewhere. This was the view I took.

So what to buy. Trying to get up to speed with the current technology, it seemed anything that supported AnnexM, Wireless N and had three ethernet ports and a usb would do the trick. Scouring the web for a router that could meet the requirements brought up the usual suspects such as Netgear etc. It is very hard to get enthused about them as they are all much of a muchness. There were a couple of reviews that leapt out though. What they had in common was the highly rated and frankly bizarrely named Fritz!box Fon 7390. It is manufactured by AVM and yes they are a German company. It is claimed to be the most popular brand in Europe. What sets it apart, putting its appearance to one side, is the extraordinary amount of functionality and features it has. It is not cheap but when you take these into consideration it really is value for money. Yes it is a router (DSL or cable) but it also integrates voice communications in a very usable way and acts as a DECT base station. You can even pick up calls from your Android phone when it is in wireless range. My sipgate VOIP service integrates seamlessly with my landline to the extent that I don’t realise I am using it. With the amount of international calls made in my house this been a real saving. It also acts as an answering machine (and will email the message to you), ftp server, media server, etc, etc, etc…

Rather than reproducing other people’s work, I would recommend reading THIS REVIEW. I agree with everything said there and the VPN works too.

The downside of the Fritz!box? Well in the UK there aren’t too many suppliers and certainly one let me down. Consequently, most support forums are in german although there is a growing english speaking presence. In any case, Google translate does a reasonable job these days and I have never needed support because the thing just works. It is comparatively expensive but you could also consider the 7270 which has pretty much the same functionality. The FB is also one of the few consumer routers (and certainly one of the cheapest) to support IPv6 and AAISP are one of the very few ISP’s to implement IPv6. However, they don’t seem compatible at this time so I have stuck with IPv4 for now. I am certainly not in my comfort zone here and it seems a missed opportunity. So anyone with any advice here would be welcome.

Other than that there isn’t much else to say. It sits in the corner doing its job. It just happens to be a much larger job than your average router does. Oh, and it looks like a 1950’s scfi spaceship too.

Categories: AAISP, AVM, DECT, DSL, Fritz!box, IPv6, isp, Modem, Router, VOIP, WIFI
%d bloggers like this: